Filter
Top Products
Adjusting the Machine
4-65
4
Customizing Settings
Automatic Feeder Cleaning
If your originals have black streaks or appear dirty after scanning them through the
feeder, clean the rollers of the feeder.
NOTE
•
[Feeder Cleaning] appears only if the optional Feeder (DADF-N1) (standard-equipped for
the imageRUNNER 3045/3035) is attached.
•
It takes approximately 20 seconds to clean the feeder.
1
Press (Additional Functions) ➞ [Adjustment/Cleaning] ➞
[Feeder Cleaning].
2
Place 10 sheets of blank paper into the feeder ➞ press [Start].
Make sure that you fan the sheets of paper well.
Use LTR paper (16 to 20 lb bond (60 to 80 g/m
2
)).
When cleaning is complete, try scanning again.
NOTE
To cancel feeder cleaning while it is in progress, press [Cancel].