Filter
Top Products
Parts and Their Functions
1-14
1
Before You Start Using This Machine
Control Panel Parts and Functions
a Control Panel Power Switch (Sub Power
Supply)
Press to turn the control panel ON or OFF. When
the control panel power switch is held for more
than three seconds, it initiates the Shutdown
mode. (See "Shutting Down the Machine," on
p. 1-21.) When turned OFF, the machine is in the
Sleep mode.
b Counter Check key
Press to display the copy and print count totals
on the touch panel display.
c Stop key
Press to stop a job in progress, such as a scan,
copy, or fax (scanning only) job.
d Start key
Press to start an operation.
e Main Power Indicator
Lights when the main power is turned ON.
f Error Indicator
Flashes or lights if there is an error in the
machine. When the Error indicator flashes,
follow the instructions that appear on the touch
panel display. When the Error indicator
maintains a steady red light, contact your local
authorized Canon dealer.
g Processing/Data Indicator
Flashes or blinks green when the machine is
performing operations, and maintains a steady
green light when fax data is stored in memory.
h Clear key
Press to clear entered values or characters.
i Numeric keys
Press to enter numerical values.
j ID (Log In/Out) key
Press when setting or enabling Department ID
Management.
k Display Contrast Dial
Use to adjust the brightness of the touch panel
display.
l Additional Functions key
Press to specify additional functions.
m Help key
Press to display explanations and instructions of
modes or functions on the touch panel display.
n Reset key
Press to restore the standard settings of the
machine.
o Touch Panel Display
The settings screen for each function is shown
on this display.
p Edit Pen
Use when operating the touch panel display,
such as to enter characters. If you lose the edit
pen, contact your local authorized Canon dealer.
Do not use an object with a sharp end on the
control panel, such as a pencil or ballpoint pen,
in place of the edit pen.
a
b
d
c
efghijklmnpo