Filter
Top Products
Specifying Device Information Delivery Settings
6-41
6
System Manager Settings
CAUTION
Preparing for delivery and updating the information after it is received may take
several minutes. Do not turn the main power OFF until these operations are
complete. Doing so may result in loss of data or damage to the data.
IMPORTANT
•
Device information can be shared between machines of the same model
(imageRUNNER 3045/3035/3030/3025), and which have the Device Information Delivery
Settings mode. However, some information may not be delivered correctly depending on
the optional equipment that is attached to the machines.
•
If [Restrictions for Receiving Device Info.] under <Receiving Settings> is set to 'Off' in
System Settings (from the Additional Functions screen), device information can be
delivered from different machine models; however, some information may not be
delivered correctly. (See "Restricting the Reception of Device Information," on p. 6-51.)
•
Device information cannot be delivered if the System Manager ID and System Password
registered in the client machine differs from the System Manager ID and System
Password registered in the host machine.
NOTE
Unique machine information, such as the IP address, is not delivered.
Additional Functions
Settings Value
Settings made from the
Additional Functions
screen (excluding the
above settings)
• Some Additional Functions settings are
not delivered. For more information,
see "Additional Functions Settings
Table," on p. 4-6.
• Information for inboxes set with a
password is not delivered. Information
for inboxes set with a password in the
client machine is not overwritten.
• If you do not deliver Additional
Functions settings and the Address
Book at the same time, the settings in
URL Send Settings in Mail Box Settings
(from the Additional Functions screen)
may be erased.
Delivered Information Contents Notes