Filter
Top Products
Finisher-S1/Puncher Unit-R1 (Optional)
7-33
7
Routine Maintenance
CAUTION
When closing the front cover of the finisher, be careful not to get your
fingers caught, as this may result in personal injury.
NOTE
If there are no staples ready for stapling after the cover is closed, the stapler unit
automatically performs a "dry" stapling operation to reposition the staples.
Removing Punch Waste
When the punch waste tray of the optional Puncher Unit-R1 becomes full, a screen
similar to the one shown below appears on the touch panel display. Follow the
procedure described below to remove the punch waste.
NOTE
This procedure is necessary only if the optional Puncher Unit-R1 is attached.
1
Open the front cover of the finisher.