Filter
Top Products
List of Error Messages
8-88
8
Troubleshooting
Remove the paper from the booklet tray.
Cause Prints from the previous job remain in the Booklet tray of the optional Saddle
Finisher-AE2.
Remedy Remove the prints remaining in the Booklet tray. Printing automatically
resumes.
Replace toner cartridge.
Cause Printing is not possible because the toner has run out.
Remedy Replace the toner cartridge. (See "Replacing the Toner Cartridge," on p. 7-46.)
Place the original on the platen glass.
Cause The specified mode requires that the original be placed on the platen glass, but
there is no original on the platen glass.
Remedy Place the original on the platen glass.
Remove the original from the platen glass.
Cause An original remains on the platen glass.
Remedy Remove the original from the platen glass, and place the new original.
Remove the original from the feeder.
Cause The machine cannot scan your original using the feeder. An original is placed in
the feeder and on the platen glass.
Remedy Remove the original from the feeder.
Original scanning area (thin glass strip) is dirty.
Cause The feeder's scanning area is dirty.
Remedy Clean the feeder's scanning area. (See "Manual Feeder Cleaning," on p. 7-53.)