Canon 3030 All in One Printer User Manual


 
Finisher-S1/Puncher Unit-R1
3-28
3
Optional Equipment
Do not place your hands into the open spaces around the moving finisher trays.
Doing so may result in personal injury or damage to the finisher.
Do not place objects or lean against the finisher unit when it is extended. Doing
so may damage the finisher or cause the machine to tip over, resulting in
personal injury.
Do not place anything under the trays of the finisher, as doing so may damage
the trays.
IMPORTANT
If the Staple mode is set, the output tray moves downward as the stack of paper that is
output increases in quantity and thickness. Once the output tray has reached its stacking
limit, or after 30 sets of prints have been output, printing and stapling stop temporarily.
Remove all of the stapled prints from the output tray, and printing and stapling resume.
Only the following paper sizes can be stapled: 11" x 17", LGL, LTR, or LTRR.
You cannot staple envelopes, transparencies, tracing paper, or labels.