Filter
Top Products
Making Prints Using the Stack Bypass
2-45
2
Basic Operations
If you are using ISO-B5, ISO-C5, COM10 No.10, Monarch: Catalog Glove
No.8, or DL envelopes, hold down the four corners of the envelopes firmly, so
that they and the sealed or glued portion stay flat.
If you are using Yougata 4 envelopes, load the envelopes without folding
them.
IMPORTANT
•
If you use envelopes that have glue attached to their flaps, the glue may melt due to
the heat and pressure of the fixing unit.
•
Take particular care to spread the envelopes out in the direction that they will
be fed.
•
Do not print on the back side of the envelopes (the side with the flap).
•
If the envelopes become filled with air, flatten them by hand before loading them
into the stack bypass.
❑ Load the envelopes, as shown below.
Flap
Flap
Feeding
Direction
When printing on the front side
of the envelopes.