Filter
Top Products
Finisher-S1/Puncher Unit-R1 (Optional)
7-31
7
Routine Maintenance
5
Insert the new staple cartridge.
Press the spring-loaded case down until it clicks into place.
IMPORTANT
•
Use only staple cartridges intended for use with this machine.
•
Do not remove the seal that holds the staples together before you place the staple
cartridge into the staple case.
NOTE
Only one staple cartridge can be inserted at a time.
6
Remove the seal holding the staples together, by pulling it
straight out, and then down.
IMPORTANT
Make sure that you pull the seal straight out, and then down. If you pull it out at an
angle, it may tear.
PUSH
PUSH
PUSH