Filter
Top Products
6) Pressing the Reset key illuminates the every other column of the top line of the LCD.
Releasing the key will clear the display.
7) Pressing the Enter key displays "OPERATION CHECK" message. Releasing the key will clear
the message.
8) Pressing the Menu key displays "OPERATION CHECK" message. Releasing the key will clear
the message.
9) Pressing the Item key displays "OPERATION CHECK" message. Releasing the key will clear
the message.
10) Pressing the Shift key illuminates the top line of the LCD (20 columns). Releasing the key
will clear the display.
11) Pressing the +Plus/-Minus key displays "OPERATION CHECK" message. Releasing the key
will clear the message.
12) When all the keys have been tested, "PANEL CHECK DONE" message appears and the DISK,
STAPLE and CONTINUE LEDs keep flashing. The message starts to move in circles in about
60 seconds. This conditions is kept until the printer is turned OFF.
e. Update flash
Turn ON the printer with the Enter and Shift keys pressed.
This function supplies the flash menu for managing/down loading the firmware.
2 - 67
CHAPTER 2