Filter
Top Products
4) Remove the high-voltage power supply
unit following steps 1-3 on Page 3-47.
5) Undo the connector, remove the 4
screws and then the main motor.
6) Remove the 2 screws and the drive unit.
➀ Screws ➁ Drive unit
Figure 3-3-5
C. Pick-up Unit
1) Pull out the upper and lower cassettes.
2) Perform steps 1-6 on Page 3-12 to
remove the multi-purpose tray pick-up
unit.
3) Remove the right cover.
4) Undo the connector and remove the
cable from the cable guide.
➀ Connector ➁ Cable
➂ Cable guide
Figure 3-3-6
5) Perform steps 1-2 on Page 3-17 to
remove the pick-up, feed and separation
rollers.
6) Remove the screw (M3x10).
7) Remove the 3 screws (M3x8), and take
out the pick-up unit.
➀ Screw (M3×10) ➁ Screw (M3×8)
➂ Pick-up unit
Figure 3-3-7
3 - 9
CHAPTER 3
➀
➁
➂
➀
➁
➀
➁
➂