Filter
Top Products
D. Pick-up/Feed/Separation Rollers
1) Pull out the upper and lower cassettes.
2) Grasp the knobs of each roller and pull
the rollers out of the printer.
➀ Pick-up roller ➁ Feed roller
➂ Separation roller
Figure 3-4-5
➀ Pick-up roller
➁ Feed roller/Separation roller
Figure 3-4-6
Note: Be sure to replace the feed roller
and the separation roller together.
E. Registration Lower Roller
1) Remove the registration roller unit fol-
lowing steps 1-5 on Page 3-12.
2) Remove the registration clutch.
3) Remove the spring, the E-ring and the
bushing.
➀ Spring ➁ E-ring
➂ Bushing
Figure 3-4-7
4) Remove the gear, the spring, the E-ring,
the bushing, and then the registration
lower roller.
➀ Gear
➁ Spring
➂ E-ring
➃ Bushing
➄ Registration lower roller
Figure 3-4-8
3 - 17
CHAPTER 3
➀
➁
➂
➁
➂
➀
➀
➁
➀
➁➂
➀
➂
➄
➁
➃