Filter
Top Products
A - 16
APPENDIX
DECK2 MISSING
OUTPUT FULL
STD. TRAY
OUTPUT FULL
CHECK BIN 1
OUTPUT FULL
CHECK BIN 2
OUTPUT FULL
CHECK BIN 3
OUTPUT FULL
SORTER BIN UP
CHECK SORTER
BIN
REMOVE ALL
PAPER
PRINTER OPEN
COVER OPEN
STACKER
COVER OPEN
SORTER
COVER OPEN
PAPER JAM
WRONG PAPER
SIZE
CHECK INPUT TRAY
OPEN FRONT
COVER
OPEN LEFT COVER
OPEN RIGHT
COVER
OPEN TOP COVER
1 PAPER JAM
2 PAPER JAM
3 PAPER JAM
4 PAPER JAM
5 PAPER JAM
6 PAPER JAM
7 PAPER JAM
8 PAPER JAM
9 PAPER JAM
deck) is missing.
The specified lower cassette (2x500 sheet
deck) is missing.
The specified face-down tray is paper full.
The specified output tray of the stapler stack-
er is paper full.
The specified output tray of the stapler stack-
er is paper full.
The specified output tray of the stapler stack-
er is paper full.
The specified output bin (face-up bin of the
sorter) is paper full.
For use only when the sorting mode of the
sorter is selected. Any or all of the bins of the
sorter are paper full or not empty.
Top, right or left (side) cover is open.
2,000 sheet or 2x500 sheet deck right cover
(paper path) is open.
Stapler stacker top or front (stapler door)
cover is open.
Sorter top or front cover is open.
A paper size mismatch has occurred. More
than one paper size has been found in the
same tray.
A paper jam occurred near the input tray.
A paper jam occurred near the front cover.
A paper jam occurred near the left cover.
A paper jam occurred near the right cover.
A paper jam occurred near the top cover.
Paper jam has occurred somewhere in the
paper path.
Paper jam has occurred in the input paper
path.
Paper jam has occurred in the input paper
path.
Paper jam has occurred in the fixing unit area.
Paper jam has occurred in the fixing unit area.
Paper jam has occurred near the face-down
tray.
Paper jam has occurred near the face-down
tray.
Paper jam has occurred in the fixing unit area.
Paper jam has occurred near the duplexing
Reinsert the lower cassette.
Remove the paper from the face-
down tray.
Remove the paper from the tray
(Bin1 of the stapler stacker).
Remove the paper from the tray
(Bin2 of the stapler stacker.
Remove the paper from the tray
(Bin3 of the stapler stacker).
Remove the paper from the tray.
Remove the paper from all the
bins (bin# 1 to 7 of the sorter).
Close all cover doors.
Close the right cover door.
Close all cover doors.
Close all cover doors.
Inspect the trays for mismatched
paper and correct. Remove all
jammed paper and insert the cor-
rect paper size in the tray. Close
all covers to go back to READY.
Check the area specified.
Remove the jammed paper from
the paper path. The top cover
must be opened and closed to
resume printing.
Message
Meaning
Action