Filter
Top Products
4. Rear cover
1) Open the upper cover.
2) Open the pick-up unit door.
3) Remove the 2 screws, unhook the claw,
and then remove the right rear cover.
➀ Screws ➁ Claw
➂ Right rear cover
Figure 3-2-10
4) Remove the 6 screws and then the rear
cover.
➀ Screws ➁ Rear cover
Figure 3-2-11
5. Delivery cover unit
1) Open the delivery cover unit.
2) Remove the 2 rods that hold the delivery
cover unit to the printer.
3) Lifting up the delivery cover unit slight-
ly, remove the right and then the left
side of the unit.
➀ Delivery cover unit
➁ Rods
Figure 3-2-12
6. Multi-purpose tray
1) Open the multi-purpose tray.
2) Unhook the 2 claws that hold the multi-
purpose tray to the printer and pull out
the tray toward you.
➀ Claws
➁ Multi-purpose tray
Figure 3-2-13
3 - 5
CHAPTER 3
➀
➁
➂
➁
➀
➁
➀
➀
➁