Filter
Top Products
D. Multi-purpose Tray Pick-up Unit
1) Remove the front cover.
2) Remove the rear cover.
3) Remove the multi-purpose tray.
4) Open the pick-up unit door.
5) Disconnect the 2 connectors, and then
remove the cable from the cable guide.
➀ Connectors ➁ Cable guide
➂ Cable
Figure 3-3-9
6) Remove the 4 screws, and then the
multi-purpose tray pick-up unit.
➀ Screws
➁ Multi-purpose tray pick-up unit
Figure 3-3-10
E. Registration Roller Unit
1) Open the upper cover.
2) Remove the clutch cover.
3) Open the transfer charging roller guide.
➀ Transfer charging roller guide
Figure 3-3-11
4) Undo the connector.
5) Remove the 4 screws and take out the
registration roller unit.
➀ Connector
➁ Screws
➂ Registration roller unit
Figure 3-3-12
3 - 12
CHAPTER 3
➁
➂
➀
➀
➁
➀
➂
➀
➁