Filter
Top Products
4. Operation Method
a. Preparation
1) Switch OFF the printer.
2) Connect the tester connector 1 to the envelope feeder connector (J24) in the printer.
3) Turn ON the printer.
4) When the printer is in standby mode, start performing checks with the tester.
Figure 4-8-4
Note: When operating the printer driver tester, electrostatic energy can cause operation fail-
ures. Therefore, when connecting the tester be sure to touch a metal part of the print-
er with your hand to discharge any electrostatic energy.
4 - 43
CHAPTER 4
DATA
DATA SET
bit 16 bit 15 bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1
DC24V
bit 2
1
0
bit 3
1
0
bit 4
1
0
bit 5
1
0
bit 6
1
0
bit 7
1
0
bit 8
1
0
ENTER
TEST
PRINT
MODE SELECT
ON
OFF
1
DISPLAY
SET UP
2
3
5
6
7
8
9
10
11
CANON INC.
MADE IN JAPAN
RY9-0104
PRINTER DRIVER
bit 1
1
0
Connector 2
Connector 1
Clip