Filter
Top Products
4) Take out the 4 connectors.
➀ Connectors
Figure 3-4-12
5) Disconnect the heater claw of the hold-
er and remove the holder. Then, gently
pull out the fixing heater from the fixing
upper roller.
➀ Claw
➁ Heater holder
➂ Fixing roller heater
Figure 3-4-13
H. Fixing Upper Roller
1) Remove the fixing unit following steps
1-2 on Page 3-13.
2) Hold up the left and right levers in the
direction of the arrow.
3) Remove the 2 screws.
4) Remove the claw then remove the sepa-
ration upper guide while pulling out the
separation lower guide.
➀ Fixing unit fastening levers
➁ Screws
➂ Claw
➃ Separation lower guide
➄ Separation upper guide
Figure 3-4-14
3 - 19
CHAPTER 3
➃
➄
➁➂
➀➀
➁
➀
➀
➀
➁
➂