Filter
Top Products
94 Software Setup
With the TWAIN driver, load a document in the scanner and click the
[Preview] button to scan one page. The scanned image is displayed in the Area
window so that you can adjust the scan area while viewing the preview image.
(See “Preview Button (TWAIN driver only),” on p. 74.)
With CapturePerfect, the last scanned image appears in the Area window. After
executing [Scan Single Page], open the Scan Area dialog box to view the
scanned image in the Area window, where you can set the scan area while
viewing the preview image.
• To avoid losing the edges of an image due to shifting of the
document page, or to remove black frames from around images
Adjust the scan area using the [Margin] slider in the Scan Area dialog box.
If the edges are missing from the image, move the slider to the right to expand
the scanning area. Alternatively, to eliminate the black frame around scanned
images, move the slider to the left to reduce the scanning area.
Scanning Multiple Documents
• To scan a document that cannot be loaded all at once as multiple
separate batches
Set the [Feeding Option] on the [Basic] tab sheet to either [Automatic Feeding]
or [Panel Feeding]. (See “Feeding Option,” on p. 83.)
When [Automatic Feeding] is selected as the [Feeding Option], the scanner
detects documents and starts scanning as they are loaded, so continuous
scanning is available just by loading the document batches repeatedly.