Filter
Top Products
8 Before Using the Scanner
Handling
WARNING
Note the following precautions whenever using the scanner.
Failure to do so may result in a fire or electric shock.
• Never use alcohol, benzene, paint thinner, aerosol sprays, or any
other highly flammable substance near the scanner.
• Do not cut, damage, or modify the power cord. Do not place
heavy objects on the power cord, and do not pull or excessively
bend the power cord.
• Never connect the power cord when your hands are wet.
• Do not connect the scanner to a multi plug power strip.
• Do not knot or coil the power cord as this may result in a fire or
electric shock. When connecting the power cord, make sure that
the power plug is securely and completely inserted into the
power outlet.
• Do not use power cords other than the power cord provided with
this scanner.
• Never try to take the scanner apart or modify it in any way, as
this is dangerous and may lead to a fire or electric shock.
• Do not use flammable aerosol sprays products near the scanner.
• When cleaning the scanner, turn the power switch OFF and
disconnect the power cord from the power supply.
• Clean the scanner using a slightly dampened cloth which has
been well wrung out. Never use alcohol, benzene, paint thinner,
or any other flammable substances.
• If the scanner makes strange noises, or gives off, smoke, heat,
or strange odors, or the scanner does not function or other
abnormalities occur when you use the machine, immediately
turn the power switch OFF, and disconnect the power plug from
the power outlet. Then, contact your local authorized Canon
dealer or the service representative for further information.
• Do not drop the scanner, or subject it to impact or strong shock.
Should the scanner ever become damaged, immediately turn the
power switch OFF, and disconnect the power plug from the
power outlet. Then, contact your local authorized Canon dealer
or service representative to have the unit serviced.
• Before moving the scanner, be sure to turn the power switch
OFF, and disconnect the power plug from the power outlet.
CAUTION
• Do not install the scanner on a surface that is unstable or tilted,
or in an area subject to excessive vibrations, as this may cause
the scanner to fall, resulting in personal injury or damage to the
scanner.