Canon DR-6030C Scanner User Manual


 
Software Setup 95
Chapter 3
The [Setting] button allows setting a delay time from when a document is
loaded until scanning starts.
Set a delay time when you need to adjust the document guides or align the
pages after loading a document with automatic feeding.
When [Panel Feeding] is selected as the [Feeding Option], scanning does not
start until you press the Start button.
After loading different-size documents, adjust the document guides or sort the
pages before pressing the Start button to start scanning.
To create separate files for each batch of documents during
continuous scanning (ISIS driver only.)
Set the [Feeding Option] on the [Basic] tab sheet to either [Automatic Feeding]
or [Panel Feeding], and set [Batch Separation] to [Auto]. Each batch of
documents is saved with different file names. (See “Batch Separation (ISIS
driver only),” on p. 83.)
To scan a batch of documents one page at a time
Set the [Feeding Option] to either [Automatic Feeding] or [Panel Feeding], and
scan each page. After scanning each page, the scanner returns to the waiting
state.
When [Automatic Feeding] is selected as the [Feeding Option], the scanner
detects documents and starts scanning as they are loaded.
When [Panel Feeding] is selected as the [Feeding Option], press the Start
button to scan after loading each page.
To stop the scanner when pages double feed
Confirm that the [Double Feed Detection] method selected on the [Others] tab
sheet suits the document being scanned. (See “Double Feed Detection,” on
p. 82.)