Filter
Top Products
Before Using the Scanner 13
Chapter 1
3. Names and Functions of Parts
This section describes the name and function of each part. Make sure to read
this section and familiarize yourself with the parts of the scanner before using
the scanner.
Front (Feed Tray Open)
Controls
Document Guides 2
Adjust them to align with
the width of the document.
(See p. 28 and p. 30.)
Document Feed Tray
Extension
Pull this tray out if the
document hangs over
the edge of the main tray.
(See p. 22.)
Document Guides
Adjust them to align with
the width of the document.
(See p. 28 and p. 30.)
Document Feed Tray
Place the document to be scanned here.
(See p. 22.)
Document Eject Tray Extension
Open if the document extends beyond the edge
of the eject tray. (See p. 24.)
Document Eject Guide
Attach it to prevent thin or long documents from
jamming when being scanned. (See p. 25.)
Document Eject Tray 1
Scanned documents
are ejected here.
(See p. 23.)
Stop Button
Push it to stop scanning.
Start Button
Push it to start scanning.
Feed Selection Lever
Use it to change the way the documents are fed.
Move it up ( ) to continuously feed documents
(page separation mode). (See p. 27.)
Move it down ( ) to feed documents one at a time or
to feed documents that are fastened together, such as
invoices, without separating them (bypass mode).
(See p. 30.)
Document Stoppers
Moves up and down
according to the paper feed
switch lever. (See p. 27 and
p. 30.)
Power Indicator
This indicator lights when
the scanner is turned ON.
Power Switch
This switch is used to turn
the scanner on.