Filter
Top Products
84 Software Setup
With the [Automatic Feeding] or [Panel Feeding] Feeding Option
[Auto]
Each batch of documents is saved with different file names.
[Patchcode]
Batches are separated whenever a patchcode sheet is detected between
documents. (See “Using Patchcode Sheets,” on p. 47.)
☞ When [Patchcode] is selected, the [Folio] Scanning Side setting on the
[Basic] tab sheet is not available.
Patchcode Orientation (ISIS driver only)
When [Patchcode] batch separation is enabled, you can select patchcode
orientation here.
☞ Settings for various patchcode types and orientations on document pages
are as follows.
[Prescan] Check Box
When this check box is selected, the first document page is prescanned and
displayed in the Prescan panel when scanning is first started. Continue
scanning after you confirm or adjust brightness and contrast of the scanned
image in the Prescan window. (See “Prescan,” on p. 99.)
[Barcodes] Button
This is enabled when the optional barcode module is installed: click it to open
the Barcode dialog box and make settings affecting barcode detection in
documents. For details, see the ISIS/TWAIN driver Help, or contact your
supplier.
[Addon] Button
This button opens the [Addon] dialog box, where you can make setting for
adding text or bitmap images to scanned document images.
Patch T
FILE A
Patch II
FILE B
Patchcode
orientation
0° 90° 180° 270°