Filter
Top Products
Document Scanner DR-6030C
Easy Start Guide
This manual describes the procedures for setting up the scanner for use. For details on how to use the scanner,
read the after p. 1.
Checking the Package Contents
If any of the items listed below are missing or damaged, contact your local authorized Canon dealer or
service representative. Keep the package and packing materials for storing or transporting the scanner.
Items included in this package are subject to change without notice.
Removing the Packing Materials
Perform the following steps to remove all the orange tape and protective materials from it. After removing
them, replace the cover and unit.
Installing the Software
Install the “DR-6030C driver” to use the scanner and the “CapturePerfect 3.0” to use scanning function.
1. Peel off the orange tape. 2. Carefully open the
document feed tray.
3. Peel off the orange tape.
4. Open the upper unit. 5. Remove the packing materials.
CANON CANADA INC.
6390 DIXIE RD
MISSISSAUGA ON L5T 9Z9
0880281099-L5T1P7-BR01
DR-6030C
Power Cord Document Eject Guide USB Cable
User’s Guide
(This Manual)
DR-6030C
Setup Disc*
Adobe Acrobat
Setup Disc
Registration Card
(U.S.A and Canada only)
* This setup disc is inserted in this manual.
For details on the disc, refer to “About the Setup Disc”(See p. 17).
Warranty Card
(U.S.A and Canada only)
Cleaning Cloth (1)
Do not grab this
protrusion.
6. Remove the roller cover and take out the packing materials.
1. Insert the DR-6030C Setup Disc
into the computer’s CD-ROM
drive.
The setup wizard automatically starts
up when you insert the CD-ROM into
the CD-ROM drive. If the setup
wizard does not start up, run the
setup.exe application on the CD-
ROM.
2. Click [Typical Installation] and follow the
instructions to install the software.
3. After the installation click [Exit] to close the
installation window.
Log on to Windows with an account that has administrator privileges.
Close all other applications before installing the software.
For Windows Vista
When the “User Account
Control” screen appears,
log on as an administrator
and click [OK].