Filter
Top Products
Using the Scanner 49
Chapter 2
Patchcode Pattern Function
There are two types of patchcodes and their function changes according to
their pattern.
PATCH T (FILE A)
PATCH II (FILE B)
How to Use Patchcode Sheets
1.
Print patchcode sheets on a printer. Print the patchcode sheets at their original
size on paper that is the same size as the data.
Note
• Print [PATCH II (A4)] and [PATCH T (A4)] on A4 size paper.
• Print [PATCH II (LTR)] and [PATCH T (LTR)] on letter size paper.
IMPORTANT
Be careful to keep the patchcode sheets clean. In particular, the effective area
for detecting patterns should be kept clean. Also, do not fold them or allow
them to become wrinkled. If this happens, the scanner will not be able to read
them.
2. Insert the patchcode sheet so it is in front of the document that is to be saved to
a separate file before loading the documents on the scanner.
3. In the ISIS driver, set the batch separation setting to [Patchcode] and then scan
the documents.
When the scanner recognizes this patchcode printed
on a patchcode sheet it creates a separate file for the
document that comes after the patchcode sheet. The
image of this sheet can be saved or not depending on
the application’s settings.
When the scanner recognizes this patchcode printed
on a patchcode sheet it creates a separate file starting
from the patchcode sheet. The image of this sheet is
saved regardless of the application’s settings.
Insert patchcode sheets in front
of the documents you want to
save to separate files.