Filter
Top Products
Making Connections
2-9
Setting Up Your Machine
2
Connect the power cord as follows:
1
Plug the supplied power cord into the power connector on the back of the machine.
2
Plug the other end of the power cord into the outlet.
NOTE
The machine has no power switch, so its power is on as long as it is plugged in. Once connected, though, the
machine still needs to warm up before you can use it.
While the machine is warming up, the message <PLEASE WAIT> appears in the LCD display:
When you connect the power cord to an AC outlet for the first time after purchase, <DISPLAY LANGUAGE> will
appear in the LCD display after <PLEASE WAIT>. In this case, set the language for the LCD display. (See
“Setting the Display Language,” on p. 2-10.)
The Fax standby mode appears:
NOTE
If the toner cartridge has not been installed yet, the message <INSTALL CARTRIDGE> appears in the LCD
display, and the Alarm indicator flashes. In this case, install the toner cartridge. (See “Installing/Replacing the
Toner Cartridge,” on p. 2-18.)
PLEASE WAIT
31/12 2005 SAT 15:11
FaxOnly STANDARD