Filter
Top Products
Polling Other Fax Machines to Receive Documents
8-2
Setting Up and Using Polling
8
Polling Other Fax Machines to Receive
Documents
The machine polling feature allows you to request a document to be faxed to you from another fax
machine. The sender only needs to make sure the document is on his fax machine and ready to be
sent: when your machine polls that machine, the document is sent automatically. The machine can poll
any fax machine that supports polling.
Requesting Another Fax to Send a Document
1
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
2
Open One-Touch Speed Dial panel ➞ press [Polling].
3
Use [ (-)] or [ (+)] to select <2.POLLING RX> ➞ press [OK].
4
Enter the destination(s) using any of the following 4 methods.
● One-Touch Speed Dialing:
❑
Press the desired One-Touch Speed Dial button(s).
● Coded Speed Dialing:
❑
Press [Coded Dial] ➞ enter the two-digit code (00-99)* using the numeric buttons.
*Enter a three-digit code (000 to 167) for the FAX-L390 model.
Be sure to press [Coded Dial] before each code.
● Directory Dialing:
❑
Press [Directory] ➞ enter the first letter of the name of the party you are searching for.
● Regular Dialing:
❑
Enter the number using the numeric buttons or [Redial/Pause].
• You can enter 10 numbers.
• Be sure to press [OK] after your entry with the numeric buttons.
NOTE
If you make a mistake, open One-Touch Speed Dial panel
➞
[Delete] to delete the last number, or press [Clear] to
delete all numbers you entered when you use the numeric buttons.
5
Press [OK].
TEL=
➞
POLLING
2.POLLING RX