Filter
Top Products
Loading Paper
4-10
Paper Handling
4
IMPORTANT
If the slide guides are not adjusted correctly for the size of the envelope, the quality of your printouts may be
adversely affected.
2
Insert the envelope straightly in the multi-purpose feeder with the print side up and the right edge (i.e.,
closer to the stamp) first.
If the envelope to be loaded has a flap on the short edge, this edge must enter the machine first. Not loading it
this way will result in a paper jam.
3
Specify the paper size.
❑ Press [Menu] ➞ press [OK].
❑ Press [ (-)] or [ (+)] to select <2.MP TRAY> ➞ press [OK] twice.
❑ Press [ (-)] or [ (+)] to select <ENVELOPE> ➞ press [OK].
❑ Press [ (-)] or [ (+)] to select the appropriate envelope type ➞ press [OK] twice.
NOTE
You can select <FREESIZE> instead of <ENVELOPE> as the paper size. When <FREESIZE> is selected, you
can specify vertical and horizontal sizes of the envelope in the following ranges:
- <VERTICAL SIZE>: 127 mm to 356 mm
- <HORIZONTAL SIZE>: 76 mm to 216 mm
4
Specify the paper type.
❑ Press [ (-)] or [ (+)] to select <HEAVY PAPER> or <HEAVY PAPER H> ➞ press [OK].
❑ Press [Stop/Reset] to return to standby mode.