Filter
Top Products
Coded Speed Dialing
5-6
Speed Dialing
5
Changing or Deleting a Number/Name Stored under a
Coded Speed Dialing Code
Follow these steps if you want to change the number and/or name registered under a Coded Speed
Dialing code, or if you want to delete all information stored under a code.
1
Follow steps 1 to 3 of “Storing Numbers for Coded Speed Dialing.” (See p.5-5.)
2
Press [ (-)] or [ (+)] to select the code (00-99)* you want to change or delete ➞ press [OK] twice.
You can also select a code by pressing [Coded Dial] and entering the two-digit code* with the numeric buttons.
*Select or enter a three-digit code (000 to 167) for the FAX-L390 model.
● To delete a number:
3
Open One-Touch Speed Dial panel ➞ press [Clear] to delete the number ➞ press [OK].
When you delete a number, the name registered for that number is also deleted.
4
Press [Stop/Reset] to return to standby mode.
● To change the number and/or name:
3
Open One-Touch Speed Dial panel ➞ press [Clear] to delete the previous entry.
4
Press the numeric buttons to enter the new number ➞ press [OK] twice.
• For details on how to enter or delete numbers, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
• If you want to delete a digit, press [W(-)] or [X(+)] to move the cursor under the digit you want to delete ➞ press
[Delete].
• If you only want to change the name, press [OK] twice after step 2 ➞ open One-Touch Speed Dial panel ➞ go
to step 5.
• If you want to keep the same name, go to step 7.
5
Press [Clear] to delete the previous entry.
➞
TEL NUMBER ENTRY
TEL=
CODED SPD DIAL
2.NAME
➞
TEL NUMBER ENTRY
TEL=457xxxx
:A
Canon EUROPA