Filter
Top Products
Redialing
6-11
Sending Faxes
6
Redialing
Manual Redialing
To redial the last number dialed with the numeric buttons, press [Redial/Pause].
To cancel manual redialing, press [Stop/Reset] ➞ [ (-)].
Automatic Redialing With Memory Sending
With memory sending, you can set the machine to automatically dial the fax number again if the
receiving fax machine does not answer or if the line is busy. You can also control how many times the
machine will redial the number and how long it will wait between dialing attempts. See “Setting Up
Automatic Redialing,” on p. 6-11.
Canceling Automatic Redialing
If you press [Stop/Reset] when waiting to redial, the LCD displays standby mode but you are still in
automatic redialing. To cancel redialing while the machine is waiting to redial, follow the procedure
described in “Deleting a Fax Job,” on p. 11-2. To cancel while the machine is redialing, do the following:
❑
Wait until the machine begins redialing.
❑ Press [Stop/Reset] ➞ [ (-)].
NOTE
The machine can print a list of document stored in memory (DOCUMENT MEMORY LIST), along with the
transaction number of each document. The document waiting to be sent using automatic redialing will be listed as
<TRANSMIT>. To print the list, see “Document Memory List,” on p. 12-11.
Setting Up Automatic Redialing
You can set up the following options for automatic redialing:
• Whether or not the machine redials automatically
• The number of times the machine attempts redialing
• The time interval between redialing attempts