Filter
Top Products
6-18
Configuration Guide for Cisco Secure ACS 4.2
OL-14390-02
Chapter 6 Agentless Host Support Configuration Scenario
Basic Configuration Steps for Agentless Host Support
Before you assign the user groups, plan how to configure the user groups. For example, users associated
with the user group can:
• Be denied access to the network
• Be limited by network access restrictions (NARs)
• Have specified password settings
For detailed information on how to set up user groups, refer to chapter 5 of the User Guide for Cisco
Secure ACS 4.2, “User Group Management.”
Step 6: Enable Agentless Request Processing
To enable agentless request processing, you must set up a Network Access Profile that enables the
feature. To create a NAP to enable agentless request processing:
Step 1 Create a new NAP.
See Create a New NAP, page 6-18 for details.
Step 2 In the Protocols page, check the Allow Agentless Request Processing check box.
Step 3 In the Authentication section, configure MAB.
See Configure MAB, page 6-21 for details.
Step 4 If you are using agentless request processing in a NAC environment, configure posture validation for the
NAP.
See Enable Agentless Request Processing for a NAP, page 6-20 for details.
Create a New NAP
To create a new NAP:
Step 1 In the navigation bar, click Network Access Profiles.
The Network Access Profiles page opens, as shown in Figure 6-8.
Figure 6-8 Network Access Profiles Page
Step 2 Click Add Profile,