Filter
Top Products
6-7
Configuration Guide for Cisco Secure ACS 4.2
OL-14390-02
Chapter 6 Agentless Host Support Configuration Scenario
Basic Configuration Steps for Agentless Host Support
The steps in this section are required to enable posture validation, which is used in Network Access
Profiles.
Obtain Certificates and Copy Them to the ACS Host
To copy a certificate to the ACS host:
Step 1 Obtain a security certificate.
Step 2 Create a \Certs directory on the ACS server.
a. Open a DOS command window.
b. To create a certificates directory, enter:
mkdir <selected_drive>:\Certs
where selected_drive is the currently selected drive.
Step 3 Copy the following files to the \Certs directory:
• server.cer (server certificate)
• server.pvk (server certificate private key)
• ca.cer (CA certificate)
Run the Windows Certificate Import Wizard to Install the Certificate (ACS for Windows)
To run the Windows Certificate Import wizard to install the certificate on the server:
Step 1 Start Windows Explorer.
Step 2 Go to <selected_drive>:\Certs.
where selected_drive is the currently selected drive.
Step 3 Double-click the \Certs\ca.cer file.
The Certificate dialog appears.