Filter
Top Products
9-7
Configuration Guide for Cisco Secure ACS 4.2
OL-14390-02
Chapter 9 NAC Configuration Scenario
Step 3: Set Up System Configuration
Edit the Certificate Trust List
After you set up the ACS certification authority, you must add the CA certificate to the ACS Certificate
Trust
list.
To add the certificate to the Certificate Trust list:
Step 1 In the navigation bar, click System Configuration.
The System Configuration page opens.
Step 2 Choose ACS Certificate Setup > Edit Certificate Trust List.
The Edit Certificate Trust List page opens.
Step 3 In the list of certificates, locate the CA certificate that you installed and check the check box next to it.
Step 4 Click Submit.
Step 5 Restart ACS.
To restart ACS, choose System Configuration > Service Control and then click Restart.
Install the CA Certificate
To install the CA Certificate:
Step 1 Choose System Configuration > ACS Certificate Setup > ACS Certification Authority Setup.
Step 2 The ACS Certification Authority Setup page appears, as shown in Figure 9-4.
Figure 9-4 ACS Certification Authority Setup Page
Step 3 In the CA certificate file box, type the CA certificate location (path and name); for example:
c:\Certs\ca.cer.
Step 4 Click Submit.