Filter
Top Products
9-16
Configuration Guide for Cisco Secure ACS 4.2
OL-14390-02
Chapter 9 NAC Configuration Scenario
Step 3: Set Up System Configuration
Step 4 Move the attributes that you want to log from the Attributes list to Logged Attributes list.
Some useful attributes to log are:
• Message-Type
• User-Name
• Caller-ID
• NAS-Port
• NAS-IP-Address
• AAA Server
• Filter Information
• Network Device Group
• Access Device
• PEAP/EAP-FAST-Clear-Name
• Logged Remotely
• EAP Type
• EAP Type Name
• Network Access Profile Name
• Outbound Class
• Shared RAC
• Downloadable ACL
• System-Posture-Token
• Application-Posture-Token
• Reason
• Profile Name
• Reason
• System-posture-token
• Application-posture-token
Step 5 Click Submit.
Step 6 In the ACS Reports table, click the Configure link for the CSV RADIUS Accounting report.
The CSV RADIUS Accounting File Configuration page appears.
Check the Log to CSV RADIUS Accounting Report check box.
Step 7 Move the attributes that you want to log from the Attributes list to the Logged Attributes list.
Some useful attributes to log are:
• User-Name
• Group-Name
• Calling-Station-Id
• Acct-Status-Type
• Acct-Session-Id
• Acct-Session-Time