Filter
Top Products
4-6
Configuration Guide for Cisco Secure ACS 4.2
OL-14390-02
Chapter 4 Using RDBMS Synchronization to Create dACLs and Specify Network Configuration
Using RDBMS Synchronization to Configure dACLs
Figure 4-1 RDBMS Synchronization Setup Page (ACS for Windows)
b. Check the Use local CSV file check box.
c. In the AccountActions file field, enter the filename of the accountActions CSV file that you created
in
Step 3: Code an accountActions File to Create the dACL and Associate a User or Group with the
dACL, page 4-4.
d. In the Directory field, enter the directory path to the accountActions CSV file.
ACS has the information with which to access the accountActions table.
Step 4 If you are using ACS SE:
a. Complete the required fields on the RDBMS Synchronization Setup page (Figure 4-2).
Figure 4-2 RDBMS Synchronization Setup Page (ACS SE)
b. Enter the following information:
• Actions File— The name of the accountActions file. The default name is accountactions.csv. The
filename provided must match the name of the accountActions file on the FTP server.
• FTP Server—The IP address or hostname of the FTP server from which ACS obtains the
accountActions file. If you specify a hostname, DNS must be enabled on your network.
• Directory—The relative path from the FTP server root directory to the directory where the
accountActions file resides. To specify the FTP root directory, enter a single dot (.).
• Username—A valid username to enable ACS to access the FTP server.