Filter
Top Products
3-8
Configuration Guide for Cisco Secure ACS 4.2
OL-14390-02
Chapter 3 Configuring New Features in ACS 4.2
RSA Support on the ACS SE
In previous releases, ACS SE devices could only send syslog messages using the local time that is set on
the ACS device. With release 4.2, you can configure the ACS SE to send syslog messages by using the
local time setting or Greenwich Mean Time (GMT).
To configure the time format used for events sent to a syslog server:
Step 1 In the navigation bar, choose System Configuration > Date Format Control.
The Date Format Control page opens.
Step 2 In the Time Zone Selection for syslog section, specify the date format for events sent to syslog servers.
To specify:
• Local time, click the Use Local Time radio button.
• GMT time, click the Use GMT Time radio button.
Step 3 Click Submit and Restart.
RSA Support on the ACS SE
ACS 4.2 adds support for RSA Token Server on the ACS SE. To add this support:
Step 1 In the navigation bar, click External User Databases.
The External User Databases page opens.
Step 2 Click Database Configuration.
The External User Databases Configuration page opens, as shown in Figure 3-5.