Filter
Top Products
9-9
Configuration Guide for Cisco Secure ACS 4.2
OL-14390-02
Chapter 9 NAC Configuration Scenario
Step 3: Set Up System Configuration
Set Up Global Authentication
In the global authentication setup, you specify the protocols that ACS uses to transfer credentials from
the host for authentication and authorization. Unless you have a limited deployment environment or
specific security concerns, you should globally enable all protocols. If you do not enable the protocols
in the global authorization setup, then they will not be available later in the Network Access Profiles
configuration interface.
To set up global authentication:
Step 1 In the navigation bar, click System Configuration.
The System Configuration page opens.
Step 2 Click Global Authentication Setup.
The Global Authentication Setup Page appears, as shown in Figure 9-6.