Filter
Top Products
6-20
Configuration Guide for Cisco Secure ACS 4.2
OL-14390-02
Chapter 6 Agentless Host Support Configuration Scenario
Basic Configuration Steps for Agentless Host Support
Figure 6-10 Edit Network Access Protocols Page
You are now ready to enable agentless request processing.
Enable Agentless Request Processing for a NAP
To enable agentless request processing for a NAP:
Step 1 In the Edit Network Access Profiles page, click Protocols.
The Protocols Settings page for the selected NAP opens. Figure 6-11 shows the top portion of the
Protocols Settings page.
Figure 6-11 Protocols Settings Page
Step 2 Check the check box for Allow Agentless Request Processing.
Step 3 Configure additional protocol configuration options as required
Step 4 If you are using ACS in a NAC environment, check the Allow Posture Validation check box in the EAP
Configuration area.
Step 5 Click Submit.