Filter
Top Products
6-19
Configuration Guide for Cisco Secure ACS 4.2
OL-14390-02
Chapter 6 Agentless Host Support Configuration Scenario
Basic Configuration Steps for Agentless Host Support
The Profile Setup page opens, shown in Figure 6-9.
Figure 6-9 Profile Setup Page
Step 3 In the Name text box, enter the name of the NAP.
Step 4 If you have set up network access filters (NAFs) and want to apply one, then from the drop-down list of
NAFs, choose the appropriate NAF.
Step 5 In the Protocol types section, select at least one RADIUS protocol type.
Step 6 Configure additional NAP settings as required.
Step 7 Click Submit.
The Edit Network Access Protocols page for the new profile appears, as shown in Figure 6-10.