Filter
Top Products
4-7
Configuration Guide for Cisco Secure ACS 4.2
OL-14390-02
Chapter 4 Using RDBMS Synchronization to Create dACLs and Specify Network Configuration
Using RDBMS Synchronization to Configure dACLs
• Password—The password for the username provided in the Login box.
The ACS SE has the information necessary to get the accountActions file from the FTP server.
Step 5 (ACS for Windows and ACS SE) Set the Synchronization Scheduling and Synchronization Partners
options as required.
Figure 4-3 shows the Synchronization Scheduling and Synchronization Partners sections of the RDBMS
Synchronization Setup page.
Figure 4-3 Synchronization Scheduling and Synchronization Partners Options
Step 6 Specify the following Synchronization Scheduling information:
• Manually—If you want to disable automatic RDBMS Synchronization, check the Manually check
box.
• Every X minutes—ACS performs synchronization on a set frequency. The unit of measurement is
minutes, with a default update frequency of 60 minutes.
• At specific times—ACS performs synchronization at the time that is specified in the day and hour
graph. The minimum interval is one hour, and the synchronization occurs on the hour that you chose.