Filter
Top Products
9-64
Configuration Guide for Cisco Secure ACS 4.2
OL-14390-02
Chapter 9 NAC Configuration Scenario
Step 8: Set Up Templates to Create NAPs
Authorization Policy
To configure an authorization policy for the Wireless NAC Layer 2 802.1x template:
Step 1 Go to Network Access Profiles.
Step 2 Choose the Authorization link from the Policies column.
The Authorization page for the profile appears, as shown in Figure 9-48.
Figure 9-48 Authorization Page for Wireless (NAC L2 802.1x) Profile Template
On this page, you can see the Wireless (NAC L2 802.1x) template configuration for authentication:
Step 3 Specify the external database that ACS uses to perform authentication:
a. To keep the default setting (ACS uses its internal database), click the Internal ACS DB radio button.
b. To specify a LDAP server, click the LDAP Server radio button and then, from the drop-down list,
choose an LDAP server.
c. From the If Agentless request was not assigned a user-group drop-down list, choose a user group
to which ACS assigns a host that is not matched to a user group.