9-62
Configuration Guide for Cisco Secure ACS 4.2
OL-14390-02
Chapter 9 NAC Configuration Scenario
Step 8: Set Up Templates to Create NAPs
Figure 9-46 Profile Setup Page for Wireless (NAC L2 802.1x)Template
The default settings for the profile are:
• Any appears in the Network Access Filter field, which means that this profile has no IP filter.
You can choose NAFs from the drop-down list, so that only specific host IPs match this profile.
• In the Protocol types list, Allow any Protocol type appears in the Protocol types list, which means
that no protocol type filter exists for this profile.
• You can click the Allow Selected Protocol types option to specify a protocol type for filtering.
• Two rules are configured in Advanced Filtering:
[026/009/001]Cisco-av-pair = aaa:service=ip admission
[006]Service-Type != 10