Filter
Top Products
9-48
Configuration Guide for Cisco Secure ACS 4.2
OL-14390-02
Chapter 9 NAC Configuration Scenario
Step 8: Set Up Templates to Create NAPs
Authentication Policy
To configure authentication policy:
Step 1 In the navigation bar, select Network Access Profiles.
Step 2 Choose the Authentication link from the Policies column.
The Authentication page for the profile opens, as shown in Figure 9-34.
Figure 9-34 Authentication Page for Layer 3 NAC Profile Template
On this page, you can see the Layer 3 NAC template configuration for authentication:
Step 3 Specify the external database that ACS uses to perform authentication:
a. To keep the default setting (ACS uses its internal database), click the Internal ACS DB radio button.
b. To specify a LDAP server, click the LDAP Server radio button and then, from the drop-down list,
choose an LDAP server.