Filter
Top Products
9-66
Configuration Guide for Cisco Secure ACS 4.2
OL-14390-02
Chapter 9 NAC Configuration Scenario
Step 8: Set Up Templates to Create NAPs
To create an agentless host for Layer 3 profile template:
Step 1 In the navigation bar, click Network Access Profiles.
The Network Access Profiles page opens.
Step 2 Click Add Template Profile.
The Create Profile from Template page opens, as shown in Figure 9-50.
Figure 9-50 Create Profile From Template Page
Step 3 Enter a Name and Description (optional).
Step 4 From the Template drop-down list, choose Agentless Host for L3.
Step 5 Check the Active check box.
Step 6 Click Submit.
If no error appears, then you have created a profile that can authenticate Layer 3 NAC hosts.
The Edit Network Access Profile page opens, and the new profile is listed in the Name column.
The predefined values for the Agentless Host for Layer 3 template include:
• Profile Setup
• Protocols
• A sample posture validation policy
• Authentication policy
Step 7 To select a predefined set of values, click on one of the configuration options.
• The profile name (to select the profile setup page for the profile)
• Protocols
• Authentication Policy
• Sample Posture Validation Rules