Filter
Top Products
9-55
Configuration Guide for Cisco Secure ACS 4.2
OL-14390-02
Chapter 9 NAC Configuration Scenario
Step 8: Set Up Templates to Create NAPs
c. From the If Agentless request was not assigned a user-group drop-down list, choose a user group
to which ACS assigns a host that is not matched to a user group.
Sample Posture Validation Rule
Figure 9-39 shows the sample posture validation rule provided with the NAC Layer 2 template.
Figure 9-39 Sample Posture Validation Policy for NAC Layer 2 Template
Sample NAC Layer 2 802.1x Template
This template creates a profile for Layer 2 NAC 802.1x requests. Before you use this template, you
should choose System Configuration > Global Authentication Setup and check the Enable Posture
Validation check box.
To create a Layer 2 NAC 802.1x profile template:
Step 1 In the navigation bar, click Network Access Profiles.
The Network Access Profiles page opens.
Step 2 Click Add Template Profile.
The Create Profile from Template page opens, as shown in Figure 9-40.