Filter
Top Products
6-5
Configuration Guide for Cisco Secure ACS 4.2
OL-14390-02
Chapter 6 Agentless Host Support Configuration Scenario
Basic Configuration Steps for Agentless Host Support
where IP_address is the IP address of the host that is running ACS and hostname is the hostname of the
host that is running ACS.
Step 2: Configure a RADIUS AAA Client
Before you can configure agentless host support, you must configure a RADIUS AAA client.
To configure a RADIUS AAA client:
Step 1 In the navigation bar, click Network Configuration.
The Network Configuration page opens.
Step 2 Do one of the following:
• If you are using Network Device Groups (NDGs), click the name of the NDG to which you want to
assign the AAA client. Then, click Add Entry below the AAA Clients table.
• To add AAA clients when you have not enabled NDGs, click Add Entry below the AAA Clients
table.
The Add AAA Client page opens, shown in Figure 6-2.