Filter
Top Products
9-61
Configuration Guide for Cisco Secure ACS 4.2
OL-14390-02
Chapter 9 NAC Configuration Scenario
Step 8: Set Up Templates to Create NAPs
Figure 9-45 Create Profile From Template Page
Step 3 Enter a Name and Description (optional).
Step 4 From the Template drop-down list, choose Wireless (NAC L2 802.1x).
Step 5 Check the Active check box.
Step 6 Click Submit.
If no error appears, then you have created a Profile that can authenticate wireless NAC Layer 2
802.1x
hosts.
The Edit Network Access Profile page opens, and the new profile is listed in the Name column.
The predefined values for the NAC Layer 2 802.1x template include:
• Profile Setup
• Protocols
• A sample posture validation policy
• Authentication policy
Step 7 To select a predefined set of values, click on one of the configuration options:
• The profile name (to select the profile setup page for the profile)
• Protocols
• Authentication Policy
• Sample Posture Validation Rules
Profile Setup
To use the Profile Setup settings from the template:
Step 1 Go to Network Access Profiles.
Step 2 Choose the profile that you created.
Step 3 The Profile Setup page appears, as shown in Figure 9-46.