Filter
Top Products
9-17
Configuration Guide for Cisco Secure ACS 4.2
OL-14390-02
Chapter 9 NAC Configuration Scenario
Step 4: Set Up Administration Control
• Acct-Input-Octets
• Acct-Output-Octets
• Acct-Input-Packets
• Acct-Output-Packets
• Framed-IP-Address
• NAS-Port
• NAS-IP-Address
• Class
• Termination-Action
• Called-Station-Id
• Acct-Delay-Time
• Acct-Authentic
• Acct-Terminate-Cause
• Event-Timestamp
• NAS-Port-Type
• Port-Limit
• NAS-Port-Id
• AAA Server
• ExtDB Info
• Network Access Profile Name
• cisco-av-pair
• Access Device
• Logged Remotely
Step 8 Click Submit.
Step 4: Set Up Administration Control
This section describes how to add remote administrator access.
Add Remote Administrator Access
To prepare ACS for remote administration:
Step 1 In the navigation bar, click Administration Control.
The System Configuration page opens.
Step 2 Click Add Administrator.
The Add Administrator page opens, as shown in Figure 9-10.