Filter
Top Products
9-41
Configuration Guide for Cisco Secure ACS 4.2
OL-14390-02
Chapter 9 NAC Configuration Scenario
Step 7: Configure Posture Validation for NAC
Configure the External Posture Validation Audit Server
You can configure an audit server once, and then use it for other profiles.
To configure an audit server:
Step 1 In the Posture Validation Components Setup page, click External Posture Validation Audit Setup.
Step 2 Click Add Server.
The External Posture Validation Audit Server Setup page appears, as shown in Figure 9-28.
Figure 9-28 External Posture Validation Audit Server Setup Page
Step 3 To configure the audit server:
a. Enter a Name and Description (optional).
b. In the Which Hosts Are Audited section, choose what hosts you want to audit. You can enter the host
IP or MAC addresses for the hosts that you want to audit or for a host that you do not want to audit.
c. For the hosts that will not be audited, choose a posture token from the drop-down list.
d. Scroll down to the Use These Audit Servers section.
Figure 9-29 shows the Use These Audit Servers section of the External Posture Validation Server
Setup page.