Filter
Top Products
6-6
Configuration Guide for Cisco Secure ACS 4.2
OL-14390-02
Chapter 6 Agentless Host Support Configuration Scenario
Basic Configuration Steps for Agentless Host Support
Figure 6-2 Add AAA Client Page
Step 3 In the AAA Client Hostname box, type the name assigned to this AAA client (up to 32 alphanumeric
characters).
Step 4 In the AAA Client IP Address box, type the AAA client IP address or addresses.
Step 5 If you are using NDGs, from the Network Device Group list, select the name of the NDG to which this
AAA client should belong, or select Not Assigned to set this AAA client to be independent of NDGs
Step 6 From the Authenticate Using list, select RADIUS (IOS/PIX).
Step 7 Specify additional AAA client settings as required.
Step 8 Click Submit + Apply.
Step 3: Install and Set Up an ACS Security Certificate
This section describes a simplified procedure for the ACS for Windows platform. For detailed
information on installing certificates, and also for information on how to install certificates on the Cisco
Secure ACS SE platform, see Chapter 9 of the User Guide for Cisco Secure ACS 4.2, “Advanced
Configuration: Authentication and Certificates.”