Filter
Top Products
9-12
Configuration Guide for Cisco Secure ACS 4.2
OL-14390-02
Chapter 9 NAC Configuration Scenario
Step 3: Set Up System Configuration
Set Up EAP-FAST Configuration
To configure ACS to work with NAC and use EAP-FAST with posture validation:
Step 1 In the navigation bar, click System Configuration.
The System Configuration page opens.
Step 2 Click Global Authentication Setup.
The Global Authentication Setup Page appears, as shown in Figure 9-6.
Step 3 Click EAP-FAST Configuration.
The EAP FAST Configuration page appears, as shown in Figure 9-8.