6-38
Cisco MGX 8850 Multiservice Switch Installation and Configuration
Release 1.1.31, Part Number 78-11223-03 Rev. B0, May 2005
Chapter 6 Card and Service Configuration
Configuring Frame Relay Service
CIR Committed information rate (CIR) bps value:
• For T1 = in the range 0–1536000
• For E1 = in the range 0–2048000.
channel type Value to set type of connection on this channel.
• 1 = NIW (network interworking)
• 2 = SIW-transparent (service interworking without any SDU translation)
• 3 = SIW-translation (service interworking with SDU translation)
• 4 = FUNI (Frame Relay UNI)
• 5 = frame forwarding
Connection
Admission Control
(CAC)
This is an optional parameter. You can select one of the following values:
• 1 = enable
• 2 = disable (the default)
controller type Value to set signalling controller type as either PVC or SPVC.
• 1 = PVC (PAR) (default)
• 2 = SPVC (PNNI)
mastership Value to set status of connection as master or slave.
• 1 = master
• 2 = slave (default)
Adm_cntrl Value to enable or disable connection admission control (CAC).
• 1 = enable CAC
• 2 = disable CAC (default)